1-1/4" X 1" ACE PUMP

This is a hydraulic pump that attaches to a tractor for spraying. The advantages of the hydraulic motor driven pump are mounting versatility, customized performance, and ease of maintenance. All hydraulic driven pumps are equipped with a stainless steel shaft and wear ring for excellent corrosion resistance. The location of the pump is not tied to the PTO or engine drive shaft. The pump can be mounted in a variety of locations to suit application requirements. The performance is dependent on the supply of hydraulic oil to the motor and not necessarily tied to engine speed. A hydraulic Roundup logo driven pump can produce higher pressures than PTO or belt driven pumps. They can also hold constant pressure at varying engine speeds on closed center hydraulic systems. On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement. Two main pump bearings support shaft loads. All pumps are equipped with easily replaceable Viton® mechanical seals. The Ace gear type hydraulic motor is more efficient than gerotor type motors, and is less subject to damage by contamination than the gerotor design. This pump has 1-1/4" suction and 1" discharge. The pump requires 4 GPM maximum hydraulic input and is recommended for pressure compensating closed system and open center systems up to 13 GPM (49.2 LPM) using internal needle valve input. Performance is adjusted by supply of hydraulic oil to motor. Maximum pressure is 100 PSI. The pump is ready for Roundup.

• Versatile mounting options
• Performance adjusted by supply of hydraulic oil to motor
• Low maintenance
• 1-1/4" suction, 1" discharge
• Requires 4 GPM maximum hydraulic input
• Recommended for Closed Center Systems
• Maximum flow @ 92 GPM
• Maximum pressure: 100 PSI
• ASC # 16830 for Inlet
• ASC # 16851 for Outlet