Fertilizer Spreader, Model P180

The Grizzly P180 Fertilizer Spreader is equipped with four fins spreading disc, the ideal spreader for the even distribution of granular and crystalline fertilizer. Constructed of steel, the 481 lb. capacity hopper has an agitator included. The manual adjusting regulating lever allows for a spreading width of 39 to 46 feet for granular material and a spreading with of 20 to 23 feet for crystalline material. Based on the specific weights of fertilizers used, the distributor vanes on the stainless steel spreading disc can be adjusted for desired distribution.

Connecting with a 3-point hitch, the fertilizer spreaders are driven by a PTO shaft that is included. The hardy steel welded frame is coated with an epoxy primer and polyurethane waterborne paint that provides great protection against UV rays, prolongs weathering, and adds long life to this fertilizer spreader. The absorbed power at 540 RPM is 6 HP. The gear box ratio is 1:1 and is internally lubricated in an oil bath for a longer life.

Specifications:
• Grizzly
• Fertilizer Spreader
  
• Model: P180
• Hopper capacity: 481 lb.
• Hopper capacity varies based on product being spread
• Steel conical hopper
• Diameter: 34 in. at top
• Spreading width: 27-50 ft.
• Transmission ratio 1:1
• 540 RPM required
• Manual opening system
• 3-point hitch, category 1
• Weight: 123 lbs.
• Epoxy primer and polyurethane coated
• Coating protects against UV and weathering
• 2 Lateral discharge exits with galvanized shutters
• Reversible lower hitch pins
• Replacement PTO shaft, ASC #31963
• Replacement distributor vane, ASC #12272
• Replacement agitator, ASC #12268
• Replacement lower agitator, ASC #12269
• Replacement entrainer #16, ASC #12292
• Replacement rubber seal, ASC #12282