2-Stage Log Splitter Pump, 11 GPM
Item #84742
Use this 2-stage gear pump for your log splitter, press, or other equipment where rapid cycles of the cylinder at low pressures are required before switching automatically to higher pressure modes in order to meet the load requirements.
Product Overview
Ideal for log splitters, presses, and other machinery, this 11 GPM 2-stage pump requires 5 HP for operation. The gear displacement is 0.517 cubic inches for low pressure and 0.194 cubic inches for high pressure. Built with a 1/2 in. shaft, this two stage gear pump has a 1 in. tube inlet port and a 1/2 in. NPT outlet port.
Specifications
- 2-Stage Gear Pump
- Clockwise Shaft Rotation (works perfect with gas engine, when a direct hookup)
- 2" bolt pattern, center to center
- Requires 5 HP
- GPM: 11
- Pressure Flow (under low pressure): 8.8 GPM
- Pressure Flow (under high pressure): 3.6 GPM
- Gear Displacement: 0.517 cubic in. low, 0.194 cubic in. high
- Shaft: 1/2 in.
- Tube Inlet: 1 inch
- NPT Outlet: 1/2 inch
- Weight: 8.4 lbs.
Shop More
May We Suggest
No Reviews Yet
Leave a Review