Skip to Main Content Skip to Footer Content

ACE Hydraulic Centrifugal Sprayer Pump

Item #33759
The ACE hydraulic motor driven centrifugal pump is an ideal sprayer pump because it has mounting versatility and does not tie up your PTO or engine drive shaft. This sprayer pump requires a minimum of 7 GPM hydraulic input. It has a 1-1/2 in. suction and a 1-1/4 in. discharge. The pump is constructed to be corrosion resistant and is RoundUp® ready.
Availability:
Product Overview

The ACE, FMC-150-HYD-206, sprayer pump is a high performance hydraulic motor driven centrifugal pump that is recommended for use on pressure compensating closed systems, load sensing closed center systems, and open center systems up to 16 GPM using internal needle valve input. The versatility of mounting this pump provides you customized performance and ease of maintenance


The pump shaft and wear rings are constructed of stainless steel for corrosion resistance. The pump comes standard with Viton® carbon/ceramic seal and Chemical resistant Valox®. This pump is Roundup® ready


The pump requires at least 7 GPM maximum hydraulic input and has a 1-1/2 in. suction and a 1-1/4 in. discharge. The mounting holes are spaced 5-1/4 in. center to center.


Specifications:

  • ACE
  • FMC-150-HYD-206
  • Mfg #: 49920
  • High performance hydraulic motor driven centrifugal pump
  • Suction: 1-1/2 in., Discharge: 1-1/4 in.
  • Viton® carbon/ceramic seals
  • Stainless steel shaft and wear ring
  • Chemical resistant Valox®
  • Performance output is based upon system configuration
  • GPM: 120
  • Roundup® ready
  • Maximum shut-off pressure: 120 PSI
  • Requires a minimum of 7 GPM hydraulic input
Product Downloads
May We Suggest
No Reviews Yet
Leave a Review