Skip to Main Content Skip to Footer Content

AJ8 (51"OL) 1-3/8"-6 SPL X 1-3/4" 20-Spline

Item #109798A
Designed for use with rotary cutters. This power take off shaft is typically used with pull type cutters. On the tractor end the shaft has a 1-3/8 in. 6 spline metal collar and on the implement end it has a 1-3/4" 20 spline. Collapsed length of the series 8 shaft is 51 inches.
Due to product size and/or weight, this product ships via Motor Freight Truck only. Liftgate service may not be available. Please be prepared to remove large items from the truck.
Product Overview

This PTO shaft assembly is designed for use with pull type rotary cutter and is 51 inches long collapsed . It has a 1-3/8 inch 6 spline tractor end with a metal pull collar and a 1-3/4 inch 20 spline on the implement end and an interfering bolt to secure the PTO shaft to the implement. This series 8 PTO shaft has a 91 HP requirement for 540 RPM.

This is a constant velocity shaft assembly with an 80° u-joint for better maneuverability. The protective shielding is included. This shielding should be maintained and in working order for your safety.


  • Series 8 PTO Shaft
  • 1-3/8 inch 6 spline tractor end
  • 1-3/4 inch 20 spline interfering bolt implement end
  • Collapsed length: 51 inches
  • Max extended length: 68.4"
  • Constant velocity PTO assembly
  • 91 HP at 540 RPM
  • 145 HP at 1000 RPM
  • For use with rotary cutters
  • Shielding included
  • Always keep shielding in working order and in place
May We Suggest
No Reviews Yet
Leave a Review