Half Disc Bearing Housing with Zerk Fitting
Item #28211
If your disc harrow is not rotating correctly, it may be time to replace your bearings. This disc bearing block half works with a bearing spacer spool. Two housings can be bolted around the spool and connected/mounted to your bearing hanger. The bearing blocks have grease fittings to allow for spool lubrication.
Product Overview
Replacing spacer spools and bearing housing is easy and quick with the correct tools. This half disc bearing housing is coupled together around a corresponding spacer spool. Once joined, they can be connected/mounted to your bearing hanger. Equipped with a grease fitting, the bearing can be lubricated for less wear and tear and for future maintenance.
Specifications
- Half disc bearing housing
- 5 in. long
- 4 grooves
- 2 middle grooves are 1-1/2 in. center to center
- Outside grooves are 4 in. center to center
- Bolt holes are 3 in. center to center
- Old style bearing cap construction
- Grease fitting
- Requires two per set
- Use with bearing spacer spool 28210 - Bearing Spacer Spool, 1" x 7-1/2"
- Use with rib bearing spool 108675 - Rib Bearing Spool 9"
- Bolt to attach the housing to bearing hanger 13311- Carriage Head Bolt 5/8" x 5"
- For 5/8" nut use 13108 - Finish Hex Nut 5/8" (Coarse) sold by the pound or 68360 sold each
- For 5/8" lock washer use 13098 - Lock Washer 5/8" sold by the pound or 75622 sold each
- For grease fitting use 86612
Featured Review
28211 BEARING
THIS BEARING HALF WORKS WELL ON DEARBORN MODEL LIFT-E DISK IF YOU USE THE MATCHING SPOOL 28210. BEARING WILL NOT FIT THE ORIGINAL SPOOL BECAUSE IT HAS SLIGHTLY LARGER DIA. ON THE MIDDLE SEAL RIDGES. I ALSO REMOVED 1/4" FROM THE SPOOL LENGTH TO MATCH ORIGINAL DISC SPACING. FIT TOGETHER AND WORKED WELL. — KEN from MI
Read More ReviewsShop More
May We Suggest