Bolster/Swivel Bracket Assembly, 12 In.

Secure your roller bunkers so they can guide your boat properly. This adjustable swivel bracket measures 12 in. long by 2-1/2 in. wide and is constructed from 11 gauge metal for strength. The bolster bracket has 2 slots that are 1/2 in. wide and 1/2 in. apart from each other. Attached at the top is the swivel bracket, this has holes measuring 1/2 in. There is a bunk bracket that connects to the swivel bracket and the bunk brackets dimensions are 1-3/8 in. x 3-1/2 in. Overall these pieces are galvanized to help protect them against rusting or other damages from harsh marine climates. When all pieces are assembled the length reaches 13 in.

• Swivel Bolster Bracket Assembly
• Galvanized for sea or fresh water climates
• Bolster construction: 11 gauge metal
• Bolster bracket: 12 in.
• Width: 2-1/2 in.
• Width of slots: 1/2 in.
• Diameter of swivel hole: 1/2 in.
• Swivel bracket construction: 11 gauge metal
• Bunk bracket: 1-3/8 in. x 3-1/2 in.
• Diameter of bunk bracket holes: 3/8 in.
• Swivel flange: 2 in. x 3-1/2 in.
• Diameter of swivel flange hole: 1/2 in.
• 2-1/2 in.
• Assembly length: 13 in.