PTO Cross Kit # 6 RW

Designed to condition and support the durability of the PTO drive shaft on rotary cutters, this cross shaft is a 6 series that fits a 6 series drive shaft. The measurements of this cross kit are the cap diameters of 30.2 mm and cross height of 92 mm. There are four external ring snaps that connect on the outside of each bearing. The bearings rotate and disburse the power throughout the machine so that all the equipment can work properly together. Without the proper cross kit, the drive shaft lacks support and poorly distributes power that could lead to other parts getting damaged.

Specifications

• PTO cross kit
• Series size: 6
• Cap diameter: 30.2 mm
• Cross height: 92 mm
• External snap rings
• For a series 6 drive shaft
• Rotating bearings