Skip to Main Content Skip to Footer Content

Delavan ™ Turbo 90 ™ Pump, Cast Iron

Item #22380
The Turbo 90 ™ cast iron turbine pump by Delavan™ is designed for various pumping jobs. Working directly off of a 1000 RPM power take off shaft, this transfer or sprayer pump can even handle solutions with suspended material. This cast iron direct drive pump has 1-1/2 inch inlet and outlet ports, stainless steel shaft and bearings, viton seals and face seals.
Product Overview

The Delavan ™ Turbo 90 ™ turbine pump is design for sprayer and liquid transfer applications. This turbine pump is constructed with a heavy-duty cast iron body and a 15/16 in. stainless steel shaft with stainless steel bearings. The viton seals, face seals and non-corrosive impeller allows this pump to handle a wide variety of chemical and agricultural needs. The pump runs directly off of a 1000 rpm pto shaft and has a 1-1/2 in. inlet and outlet port. The large ports allow for high volume flow. Flow rates are dependent on rpm and pressure. The maximum flow rate is 90 gpm at 0 psi and 1200 rpm.

  • Delavan ™ Turbo 90 ™ Turbine Pump
  • Model: 26556-11 with face seals
  • 1-1/2 in. inlet and outlet ports
  • Works directly off of a 1000 RPM PTO (not recommended for use with a 540 RPM PTO)
  • 15/16 In. Stainless steel shaft and bearings
  • Corrosion resistant thermoplastic impeller
  • Viton seals
  • Volume up to 90 gpm
  • Pressures up to 75 psi
  • Maximum recommended temperature: 120 ° F
  • Coupler is not included: use ASC # 31979
Product Downloads
May We Suggest
No Reviews Yet
Leave a Review