Disc Harrow Bearing 1" Square Bore, ST208‑1N
1 – 4 | 5 – 9999 |
---|---|
$27.99 | $26.59 |
Disc Harrow Bearing ST208-1N has a 1-inch square bearing bore and 4 bolt holes. This bearing is lubricated and sealed with molded rubber inner seal and has a flexible composite retainer. The two flanged heavy gauge housing plates are stamped together with 8 rivets. These square bore disc harrow bearings are manufactured to reject both moisture and dirt adding longer life to your disc harrow. Whether used for agriculture or industrial use, these disc harrow bearings are constructed to hold up under the harshest conditions.
Specifications- ST208-1N
- 1 in. square bearing bore
- Bolt size: 1/2 in.
- 4 bolt holes: 0.531 in.
- Bolt pattern, bottom left to top right, bolt to bolt 4.69 in.
- Overall length 4.750 in.
- 8 rivets connect 2 flange housing plates
- Lubricated and sealed bearings
- Molded rubber integrated inner seal
- Flexible composite retainer
- Fits Modern, Monroe Tuffline, King Kutter, Howse, IHC
I have one 42 acre plot that had not been touched for 20 - 25 years except by the cows. Took my little 8 foot Leinbach line disc to work and immediately started losing discs and bearings! Bought some of these ASC 1" Square flanged bearings and slowed down so the thing would stop jumping and made 5 complete passes last year and 1 this year with no failures. I believe the flange covering almost all of the bearing with the seals inside should give these the best chance they have at a long life. Now if only they had a zerk in there to grease them! .... — Danno from TX
Read More Reviews