16" Disc Hiller with 22" Shank, King Style Hub
A disc hiller assembly such as this 16 inch disc hiller and 22 inch shank assembly together form raised seedbeds or bury root vegetables. This King style bed shaper has a six bolt on 4-1/4 inch pattern. Take a pair to create seeding mounds in one pass.
The solid 22 inch steel shank connected to the disc measures 1-3/16 inches in diameter. The width of each disc assembly can be adjusted to particular specifications.
Specifications
- 16 in. Disc Hiller with 22 in. Shank
- Shank diameter: 1-3/16 in.
- Steel construction
- King style hub with 6 holes
- Hub hole spacing: 1/4 in. square bolts on 4-1/4 in. pattern
- Replacement blade, ASC #25903
- Replacement shank, ASC #30336
- Replacement hub, ASC #35740
- Replacement bearing, ASC #17861
| Product Number | Ref # | Description | Qty Required |
|---|---|---|---|
| 11678 | 2 | 16" Shank (1-3/16" rd) | 1 |
| 30336 | 2 | 22" Shank (1-3/16" rd) | 1 |
| 35740 | 3 | Hub - No Bearings | 1 |
| 17861 | 4 | 206 GGH Bearing | 1 |
| 80970 | 5 | 12" Blade 3 MM | 1 |
| 80971 | 5 | 14" Blade 3 MM | 1 |
| 80973 | 5 | 16" Blade 3 MM | 1 |
| 82403 | 6 | Snap Ring | 1 |
| 13099 | 7 | 3/4" Lock Washer | 1 |
| 13109 | 8 | 3/4" Hex Nut | 1 |
| 33955 | 9 | 3/4" Flat Washer | 2 |
| 29842 | 10 | 3/4" x 3-1/2" Thin Head Bolt | 1 |
| 13103 | 11 | 1/4" Hex Nut | 6 |
| 13093 | 12 | 1/4" Lock Washer | 6 |
| n/a | 13 | 1/4" Ribbed Bolt | 6 |
Should this product not fit your requirements, tool bar, or tractor, we carry a variety of disc hillers to offer.
I purchased 6 of these discs to construct a 3-row hiller. The disc assemblies were less expensive to buy from ASC than anywhere else I found. Shipping was fast and reasonable. I clamped these to my tool bar using clamps that I fabricated and 2-1/8" U-bolts. Made building rows and beds much easier! — Dan from GA
Read More Reviews