12" Disc Hiller with 16" Shank, Blanton Style Hub
Item #33132
Use this 12 inch disc hiller with a 16 inch shank to efficiently create raised garden beds or cover your crops. The Blanton style hub has 4 bolts and contains bearings to resist on wear and tear. Attached to your tool bar or to cultivator, use two of these disc bedders to move your soil efficiently in one pass.
Product Overview
The 12 inch disc hiller can be used in a series of two attached to a tool bar or Keulavator cultivator to create raised garden beds or cover a crop such as potatoes. Adjust the width of the hilling discs for your specific requirements.
The 12 inch disc constructed of steel is equipped with a Blanton style hub with a 4-bolt mounting pattern with 5 inch on center spacing. Each Blanton hub is assembled with two bearings to help resist wear and tear while building your garden beds. The sturdy 16 inch shank on the disc hiller is also constructed of steel and is 1-3/16 inches in diameter.
Specifications
- 12 in. blade with 16 in. shank
- Shank diameter: 1-3/16 in.
- Blanton style hub with 4 bolts
- Hub hole spacing: 5 in. center
- Use with a Keulavator, ASC #51946
- Replacement hub, ASC #11679
- Replacement bearings use 17849 (requires 2)
- Replacement snap ring, ASC #27936
| Product Number | Ref # | Description | Qty Required |
|---|---|---|---|
| 87728 | 1 | 12" Blade 3 MM | 1 |
| 25900 | 1 | 14" Blade 3 MM | 1 |
| n/a | 1 | 16" Blade 3 MM | 1 |
| 11679 | 2 | Hub - No Bearings | 1 |
| 11678 | 3 | 16" Shank (1-3/16" rd) | 1 |
| 30336 | 3 | 22" Shank (1-3/16" rd) | 1 |
| 17849 | 4 | 204-BBAR | 2 |
| 27936 | 5 | Snap Ring | 2 |
| 13275 | 6 | 5/16" Carriage Bolt | 4 |
| 13104 | 7 | 5/16" Hex Nut | 1 |
| 13094 | 8 | 5/16" Lock Washer | 4 |
| 29842 | 9 | 3/4" x 3-1/2" Thin Head Bolt | 1 |
| 13099 | 10 | 3/4" Lock Washer | 1 |
| 13109 | 11 | 3/4" Hex Nut | 1 |
| 33955 | 12 | 3/4" Flat Washer | 1 |
| n/a | Spacer | 1 |
Shop More
May We Suggest
No Reviews Yet
Leave a Review