Skip to Main Content Skip to Footer Content

Contact

Account

Cart

Disc Hub for KMC® Strip Tiller

Item #89455
Write a Review
Replace worn disc hubs on your KMC strip tiller so that it functions properly. This disc hub supports the swivel coulters which allows them to perform a well secured operation. There are 4 bolt holes that surround this hub bearing for installation.
100% Satisfaction Guaranteed
Product Overview

This hub bearing is designed for KMC strip tillers, to secure the swivel coulters into position. The center diameter measures 3/4 inch and the bearing is tri-ply sealed. This sealed bearing protects the machinery from contaminants such as moisture, which could seep through and cause harm to the parts. The seal is also protected from abrasions when the machine is in action. There are 4 usable bolt holes to secure this disc hub, and the rim thickness measures 3/16 inch.

Specifications

  • Hub Assembly
  • Part Number: RM011K
  • Center diameter: 3/4 in.
  • Rim thickness: 3/16 in.
  • 4 bolt holes
  • To fit KMC® Strip-Till Rig
  • Supports swivel coulters
  • Tri-ply sealed bearing, protects against moisture and contaminants
  • Protects seal from abrasions
  • For replacement bearings (2 required) use 34471 - 205NPP9
  • For replacement snap rings (2 required) use 29353
Shop More

Shipping & Returns

Shipping & Return Policy
May We Suggest
Npp Radial Ball Bearing image 205NPP9 Ball Bearing
Item # 34471
$10.99 EA
See Similar
Zp Mst Flange Hole image 52M-2ZP Bearing Flange
Item # 17972
$2.99 EA
See Similar
Coulter Blade Fluted 20 image 20" x 4.75 MM, Fluted Coulter Blade to fit KMC
Item # 109076
$47.88 EA
In stores only
See Similar
534033 Wavy Coulter Blade 17 inches x 4mm with a 3-11/16-inch round center hole image 17" X 4MM, 3-11/16" RCH, 5" To Fit KMC® BCD WAVY COULTER BLADE
Item # 34288
$36.99 EA
See Similar
Write a Review
Leave a Review