Indusco Eyebolt Drop Forged Hot Dipped Galvanized 3/8" x 4-1/2

Eyebolt Drop Forged Hot Dipped Galvanized 3/8" x 4 1/2" with Standard Hex Nut

Specifications

• Eyebolt 3/8" x 4 1/2"
• Drop forged
• Hot dipped galvanized
• Complete with standard hex nut
• Thread length 2.5"
• Eye inside dimension 0.75"
• Eye outside dimension 1.50"
• Working load limit 1200 pounds
• Never exceed the working load limit
• Failure to follow the instructions for use below and these warnings may cause death or serious injury.
• Rated capacity is drastically reduced when loading at any angle.
• Follow all warnings, use, and application instructions as supplied by the manufacturer.
• Loading must never be made at an angle greater than 45° from the bolt centerline.
• At any angle of 45°, the rated capacity is reduced to 1/4 of the tabulated value.
• Loads should always be applied to the lifting eyes in the plane of the eye, not at some angle to this plane.