Half Disc Bearing Housing with Zerk Fitting

Replacing spacer spools and bearing housing is easy and quick with the correct tools. This half disc bearing housing is coupled together around a corresponding spacer spool. Once joined, they can be connected/mounted to your bearing hanger. Equipped with a grease fitting, the bearing can be lubricated for less wear and tear and for future maintenance.  This bearing half fits many, many, brands of disc harrows including HI-CO which is made by Howse® Implement Company. 

Specifications

• Half disc bearing housing
• 5 in. long
• 4 grooves
• 2 middle grooves are 1-1/2 in. center to center
• Outside grooves are 4 in. center to center
• Bolt holes are 3 in. center to center
• Old style bearing cap construction
• Grease fitting
• Requires two per set
• Use with bearing spacer spool 28210 - Bearing Spacer Spool, 1" x 7-1/2"
• Use with rib bearing spool 108675 - Rib Bearing Spool 9"
• Bolt to attach the housing to bearing hanger 107693- Carriage Head Bolt 5/8" x 5"
• For 5/8" nut use 13108 - Finish Hex Nut 5/8" (Coarse) sold by the pound or 68360 sold each
• For 5/8" lock washer use 13098 - Lock Washer 5/8" sold by the pound or 75622 sold each
• For grease fitting use 49109
• Fits HI CO made by Howse® Implement Company and numerous other brands