Skip to Main Content Skip to Footer Content

3-Point Hay Tedder, 2 Rotor, V-Belt Transmission, 9 Ft.

The average rating for this product is 5 out of 5 stars
3 reviews
Constructed with V-belt transmission driven rotors, this hay tedder can provide 9 ft. of working area. The hay tedder is PTO driven and requires 23 hp minimum to 33 hp maximum for ideal operation. By Baltic®, this economical hay tedder is a great choice when all conditions are right in the field. The tedder has a working speed between 4 and 8 mph. Ideal conditions would be lighter, drier, shorter and newly cut hay. If you have heavier and wetter hay, try using a lower mph operating speed while maintaining 540 rpm.
Due to the size and/or weight of this product, it must be shipped via Motor Freight Truck only. Someone must be present for delivery.
Product Overview
Use this economical hay tedder to tedder grass type hays such as ryegrass, fescue, timothy, bermuda, orchard grass and straw after the cutting process and offer a faster drying time. This hay tedder may not work well tedding grass types like alfalfa and clovers. Built by BALTIC®, this 3-point hay tedder is designed to use a simple V-belt driven transmission to turn hay. It includes two rotors with 5 tines each that can lift and turn the hay. Be sure to check your tedder tine angle adjustment for best results. This tedder comes complete with two tires and requires a 23 to 33 hp power requirement. It is also PTO driven, and uses ASC # 89799 PTO Shaft, Series 4, 53 In.
  • BALTIMATIC® Hay Tedder
  • Working width: 9 ft. (use more narrow swaths for heavier and wetter hay)
  • Dimensions: 57 in. L x 106 in. W x 47 in. H
  • Tedder Weight: 264 lbs.
  • Tractor requirement: 23-33 HP
  • 12 in. ground clearance for transport
  • 2 rotors
  • Rotor speed: 540 rpm
  • Working Speed: 4 mph to 8 mph (adjust based on hay conditions)
  • Two pneumatic tires: 15 in. diameter x 6 in. wide
  • Weight: 280 lbs.
  • Adjust tedder teeth to be no closer than 1/4 in. above ground surface to prevent ground to teeth contact on uneven terrain
  • Uses PTO shaft ASC # 89799, sold separately
  • Replacement tines,ASC # 82953
  • Use ASC # 82954 Rubber Wheel For Baltic Tedder
Looking for a different size? We carry a variety of hay tedders that can fit any harvest's needs.
Customers Who Viewed This Also Viewed
PTO Shaft, Series 4
image PTO Shaft, Series 4, 53 In.
Spring Tine For Baltic Tedder
image Spring Tine For Baltic Tedder
The average rating for this product is 5 out of 5 stars
V-Belt For Baltic Tedder
image V-Belt For Baltic Tedder
Rubber Wheel For Baltic Tedder
image Rubber Wheel For Baltic Tedder
Product Review Summary
Based on 3 reviews
The average rating for this product is 5 out of 5 stars
Overall Rating: 4.5/5.0
Customer Reviews
April 13, 2020
Works great for small hay operations
This shopper rated the product 5 out of 5 stars

Purchased to help spread out the windrows that my 65" drum mower would leave after cutting. It's small enough I can run up and down each windrow and get it evenly spread without layering to much on the following windrow. For individuals that bale there own 5-10 acres for personal use this item is hard to beat for the price. Especially if you are baling obscure shaped fields where backing up might be a necessity.

Lee from MI
December 11, 2019
Good equipment for our hobby hay farm
This shopper rated the product 5 out of 5 stars

We cut Kentucky fescue on nine acres and make it into mini round bales. This equipment is the smallest we could find to run on a 22 hp tractor. It is sometimes difficult to lift off the ground because the tractor is small. However, this tedder does the job much better than the small belt Tedder we used previously. Nice addition to our barn. Be sure to get a spare wheel or two. Be sure to check you package before you leave the store. We had to go back to get missing parts.

Jim from FL
March 19, 2018
Nc small farm
This shopper rated the product 4 out of 5 stars

We bought it because it was the cheapest option available, it works good for everything we used it on except long stemmy stuff like thick Johnson grass, not much to brake on it except the belt, the tires are on the cheep side but overall a good piece of equipment for the price.

Stephen from NC