Flotec FP422 Cast Iron Convertible Jet Pump 3/4 Horsepower

Flotec FP422 Cast Iron Convertible Jet Pump 3/4 Horsepower Without the Deep Well Injector Kit

Specifications:

• Can be used for deep or shallow well
• Maximum capacity: 11.9 GPM (shallow well)
• Flow at 10' lift and 40 psi is 10.8 GPM (shallow well)
• Maximum lift: 25' with a shallow well and 100' with a deep well setup
• Maximum pressure: 60 psi with a shallow well setup and 54 psi with a deep well setup
• Pressure switch settings: 30 psi on and 50 psi off
• Suction pipe size 1 1/4" NPT
• Discharge pipe size 1" NPT
• AMP draw (full load): 6.1 amps on 230 volts and 12.2 amps on 115 volts
• Voltage: 230 volts or 115 volts 60 HZ
• Recommended breaker: 15 amp for 230-volt and 20 amp for 115-volt
• Maximum water temperature: 140 degrees Fahrenheit (60° C)
• Superior performance at depths to water of 100' or less
• Rugged, heavy-duty pump housing
• Ready to install 230-volt motor-- see manual for the 115-volt conversion
• Pressure switch pre-wired with 30-50 psi pressure setting
• Owner's manual