Skip to Main Content Skip to Footer Content

L-Shank with Washer

The average rating for this product is 5 out of 5 stars
1 review
This L-Shank with washer is made to hold or fit onto the C-shank cultivator. Features a 11/16 in. hole to accommodate 5/8 in. bolt.
Availability:
#79577
Product Overview

Specifications

  • L-shank with washer
  • Made to fit 10406 Cultivator "C" Shank, 2 Hole
  • Material: cast steel
  • Color: red
  • Diameter of the shank: 1-3/16"
  • 11/16" hole to accommodate 5/8" bolt
  • To attach the C-Shank to this shank, use 5/8" x 3" Grade 2 bolt with lockwasher and nut
Featured Review
This shopper rated the product 5 out of 5 stars
Solidly built, must have several, they are that awesome.

I just received my L-Shank with washer. I did not expect it to be red, but I like the color, anyway. My preference would have been for a black painted shank as all others are the same color, but a splash or red never killed anyone. The shank is solidly built, one solid bar of steel, bent at 90 degrees at about the middle (upper part is about 7" and the lower about 6") with a flat end with a specially sized washer that allows the cultivator shank to fit exactly in a molded groove and fit perfectly. You will require a flat head hex bolt about 2.25 or 2.5 inches long to fasten it securely. Plow bolts do not work due to the washer's construction. I installed the shank on my toolbar (the shank's diameter is about 1.25" or thereabouts), but could not try it out because we had 4 day of rain and there is too much mud to take the tractor out. — Andrei Calciu from VA

Read More Reviews
Product Review Summary
Based on 1 review
The average rating for this product is 5 out of 5 stars
Overall Rating: 5.0/5.0
Customer Reviews
May 20, 2013
Solidly built, must have several, they are that awesome.
This shopper rated the product 5 out of 5 stars

I just received my L-Shank with washer. I did not expect it to be red, but I like the color, anyway. My preference would have been for a black painted shank as all others are the same color, but a splash or red never killed anyone. The shank is solidly built, one solid bar of steel, bent at 90 degrees at about the middle (upper part is about 7" and the lower about 6") with a flat end with a specially sized washer that allows the cultivator shank to fit exactly in a molded groove and fit perfectly. You will require a flat head hex bolt about 2.25 or 2.5 inches long to fasten it securely. Plow bolts do not work due to the washer's construction. I installed the shank on my toolbar (the shank's diameter is about 1.25" or thereabouts), but could not try it out because we had 4 day of rain and there is too much mud to take the tractor out.

Andrei Calciu from VA