Skip to Main Content Skip to Footer Content

Portable Bolt On Winch

This portable bolt on winch is used to pull in (wind up), let out (wind out), or otherwise adjust the "tension" of rope or wire rope (also called "cable" or "wire cable").
Product Overview

For a permanent installation, use this weld on winch for bottom applications. Designed to hold 3 or 4 inch webbing, this winch has a fully slotted mandrel. With the capacity to hold approximately 30 ft. of webbing, this weld on winch is the perfect solution for a permanently mounted winch. Designed for bottom mount applications, this winch is durable and made to hold up against rugged use.


  • Bolt on winch
  • 2 bolt holes are 2-3/8 inches center to center
  • The bolt size is 3/8 inch
  • The width of the mounting plate is 4 inches
  • Can bolt over a 3/4 inch thick bar
  • Low profile
  • Approximate Capacity: 30 ft. of webbing
  • All steel construction
  • Weld-on winches are designed to be permanently mounted in a fixed position
  • For use with 4" straps
  • Breaking strength: 1,200 lbs
No Reviews Yet
Leave a Review