Skip to Main Content Skip to Footer Content

Input Shaft Seal 35mm x 54mm x 11mm

The input shaft of a gearbox typically has the highest speeds of any shaft in the drive-line of a gearbox.
Product Overview

It is not uncommon for the gearbox to suffer from input shaft seal failure. This can easily be identified by either a mist, or a drop of transmission oil on the bottom of the bell-housing. Although with geared motors the gear unit seal on the input side is very well protected against environmental influences by the gearbox, the seal of the output shaft of the gear unit is subject to severe environmental influences. In general, the sealing of gear units and geared motors is very important.


No Reviews Yet
Leave a Review