Short Lag Screw 1/2 Inch By 2 Inch

The 1/2 inch by 2 inch Lag Screw Shield is used in concrete and masonry as an anchor for a 1/2 inch Lag Screw. A 3/4 inch by 2 inch hole is drilled to hold the Lag Screw Shield and the shield is inserted into the hole then tapped in with a hammer. Next, a 1/2 inch by 2 inch lag screw is placed through the piece being anchored and into the Lag Screw Shield. The lag screw is then screwed into the shield using a wrench or drill with a socket. The shield then expands for a solid anchor.

Specifications

• 1/2" X 2" SHORT LAG Screw SHIELDS
• Corrosion resistant
• for anchoring 3/4 inch lag screws
• Use in wood or concrete
• USE Hex head Lag Screw 1/2 inch by 2 inch item 13252