Indusco Latch Kit Zinc Plated for 1-1/2 to 2 Ton Capacity Hook

Latch Kit Zinc Plated Carbon Steel for 1-/2 to 2 Ton Capacity Hook

Specifications

• Zinc plated
• Carbon steel
• For use on 1 1/2 to 2-ton capacity hook
• Complete with spring, bolt, and nut
• Failure to follow the instructions for use below and these Warnings may cause death or serious injury.
• Always inspect the hook and latch before use.
• Never use a latch that is distorted or bent.
• Follow all warnings, use, and application instructions as supplied by the manufacturer.
• Loads may disengage from the hook if proper procedures are not followed.
• A falling load may cause serious injury or death.
• See OSHA rules 1926.1431(g) and 1926.1501(g).
• A hook and latch without a positive lock secured with a bolt,nut, and cotter must not be used for personnel lifting.
• The hook must always support the load. The load must never be supported by the latch.
• Read and understand these instructions before using hook and latch.