Skip to Main Content Skip to Footer Content

Disc Hiller with 16" Shank, Blanton Style Hub, 14" Width

Item #11676
Use the 14 inch disc hiller with a 16 inch shank to create raised garden beds or cover your crops. The Blanton style hub has 4 bolts and contains bearings to resist on wear and tear. Attached to your tool bar or to a Keulavator, ASC #51946, use two of these hillers to move your soil efficiently in one pass.
Product Overview

The 14 inch disc hiller can be used in a series of two, attached to a tool bar or Kuelevator, ASC #51946, to create raised garden beds or cover a crop such as potatoes. Adjust the width of the hilling discs for your specific requirements.

The 14 inch disc constructed of steel is equipped with a Blanton style hub, has a 4-bolt mounting pattern, with 5 inches on center spacing. Each Blanton hub is assembled with two bearings to help resist wear and tear when building your garden beds.

The sturdy 16 inch shank on the disc hiller is also constructed of steel and is 1-3/16 inches in diameter.


  • 14 in. disc with 16 in. shank
  • Shank diameter 1-3/16 in.
  • Replacement bearings use 17849 (requires 2)
  • Blanton style hub with 4 bolts
  • Hub hole spacing 5 in. center
Blanton Style Disc Hiller

Ref #

87728112" Blade 3 MM1
25900114" Blade 3 MM1
25901116" Blade 3 MM1
116792Hub - No Bearings1
11678316" Shank (1-3/16" rd)1
30336322" Shank (1-3/16" rd)1
279365Snap Ring2
1327565/16" Carriage Bolt4
1310475/16" Hex Nut1
1309485/16" Lock Washer4
2984293/4" x 3-1/2" Thin Head Bolt1
13099103/4" Lock Washer1
13109113/4" Hex Nut1
33955123/4" Flat Washer1
May We Suggest
No Reviews Yet
Leave a Review