Skip to Main Content Skip to Footer Content

Small Pair Tine Assembly for Cultivator

Item #90799
Designed for use with a spring loaded cultivator or tiller, this tine assembly includes 24 items. These items are needed to connect with the cultivator body to till soil. It may be used with ACS # 10391 Field Cultivator with 9 Shanks.
Due to product size and/or weight, this product ships via Motor Freight Truck only. Liftgate service may not be available. Please be prepared to remove large items from the truck.
Product Overview

Connected to the tiller body on ACS # 10391 Field Cultivator with 9 Shanks, this small pair tine assembly offers a section of the tiller tools needed for this spring loaded tiller. With the proper tilling shovel to drive through soil to break hard clumps and rip up weeds, this kit contains the installation parts needed to support the shovel. Listed below are all of the cultivator parts with their quantities included, for this small pair tine assembly.


  • Small Pair Tine Assembly, FKSLOUSA-504
  • For Cultivator, ACS # 10391 Field Cultivator with 9 Shanks.
  • Center to center mounting bolt holes from front to back is 20-1/4 inches
  • Shank height is 16-1/2 inches
  • Helps break up soil
  • Top if shank length: 17"
  • Kits includes 24 parts
  • Small Pair, right or left (1)
  • Support Flat (1)
  • Tine Assembly (1)
  • U-Clamp (1)
  • Shovel (1)
  • Shovel Bolt, 7/16 in. x 2-1/2 in. (2)
  • Hex Nut, 7/16 in. (2)
  • Hex Head Bolt, M16 x 95 (1)
  • Nylock Nut M16
  • Spring Washer (1)
  • Anchor Pin (1)
  • Spring, 10mm (2)
  • Bolt, M12 x 20 (2)
  • Spring Washer M12 (2)
  • Bush Anchor Pin (1)
  • Hex Nut M18 (2)
  • Spring Washer (2)
May We Suggest
No Reviews Yet
Leave a Review