Faza F150 Fertilizer Spreader, Round
Constructed of steel and epoxy coated to resist damage and corrosion, the hopper weighs 152 pounds empty and has a 330-pound capacity. Capacities may vary depending on the product being used. This 3-point fertilizer spreader is constructed with a sturdy steel frame that is covered with a coating system of epoxy primer and polyurethane waterborne paint. This provides excellent protection against UV rays and weathering.
Specifications
- Faza brand
- Model number: F150
- Agitator Option Not available for this model
- Round Fertilizer Spreader
- Category 1 hitch
- Do not exceed PTO over 540 RPM
- Capacity: 330 lbs.
- Hopper width: 34 in.
- Complete unit height: 34-3/4 in.
- Spreading width: 6-1/2 ft. - 39 ft. (2-12m)
- Equipped with PTO shaft
- Steel hopper no welds
- 3 spreading patterns with accurate & uniform patterns
- Spreading vanes can be adjusted
- Use ASC # 31963A for replacement PTO shaft
- Use ASC # 119249 for Gearbox
- Use ASC# 124426 for replacement Spinner Disc with Vanes
- Please see the manual for the spreading chart for fertilizer and seed
Shipping & Returns
Shipping & Return PolicyA friend and I went in halves on this a couple of weeks ago. Yesterday he spread 300 lbs and I did 150 lbs. Spreader worked great on both tractors. Well worth the money for the time and energy saved versus a push yard spreader. Big shoutout to Agi staff for sending me a new manual (original was soaked in storage tube) The cons. You end up with an 1” of fertilizer because the spinner is high and the cone wide with a flat bottom. Not a big deal but…. Second is the control.. Work great and three different sling angles, it sticks out so much you can’t use a quick hitch. Again not a biggie but would be nice if QH compatible. — Stuart from FL
Read More Reviews
A friend and I went in halves on this a couple of weeks ago. Yesterday he spread 300 lbs and I did 150 lbs. Spreader worked great on both tractors. Well worth the money for the time and energy saved versus a push yard spreader. Big shoutout to Agi staff for sending me a new manual (original was soaked in storage tube) The cons. You end up with an 1” of fertilizer because the spinner is high and the cone wide with a flat bottom. Not a big deal but…. Second is the control.. Work great and three different sling angles, it sticks out so much you can’t use a quick hitch. Again not a biggie but would be nice if QH compatible.
