Skip to Main Content Skip to Footer Content

Agmate® Finishing Mower, 5' Rear Discharge, 5FMOWR

The average rating for this product is 5 out of 5 stars
8 reviews
This Agmate® finishing mower is ideal for large lawns or golf courses. The 5 ft 3-point mower has a 58.27" cutting width with a 35" rear discharge to make cutting your lawn easier.
Due to the size and/or weight of this product, it must be shipped via Motor Freight Truck only. Someone must be present for delivery.
Product Overview

This Agmate® 5 foot estate mower will allow close mowing to obstacles for faster yard maintenance. Either side may be used for close trimming, which isn't available on side discharge systems. The rear discharge gives you an advantage for eliminating grass buildup in uncut areas and reduces blade wear and fuel costs.

The 35 inch discharge throat provides an almost unobstructed flow of cut material, and the chain guard allows the grass to be safely and smoothly discharged.

This 3-point mower has 4 caster gauge wheels that adjust the cutting height and allow the deck to float with the ground contour. The solid rubber flotation tires are not affected by punctures or tire pressure loss, ensuring an even cut every time.

The finishing mower has 3 belt driven blades with a chain guard. The mower has category 1 hitch pins installed, and a quick coupler PTO driveline shaft is included. The recommended tractor HP for this mower is 20-50.

  • Agmate® EM5
  • 5 foot finishing mower
  • Recommended tractor horsepower: 20 to 50
  • Overall width: 59.05"
  • Cutting width: 58.27"
  • Cutting height: 1.38" to 4.53"
  • Weight: 509 lbs.
  • Number of blades: 3
  • Deck thickness: 10 gauge (2.5 mm)
  • Gearbox HP: 45
  • Blade thickness: 1/4"
  • PTO driveline: series 4
  • Category 1 free floating hitch
  • Gauge wheel: 3" width x 8" tall (standard duty)
  • Gearbox Ratio: 1:2.83 with cast iron housing
  • Blade Speed: 76 m/s; 2,874 RPM
  • Rear discharge width: 35 inches
  • PTO driveline shaft included; wider mower
  • For Axle Bolt use ASC # 69637
  • For replacement blades use ASC #68194
  • For a pair of V-belts use ASC #68195
  • For a replacement wheel use ASC #83778
  • Replacement wheel fork, ASC #69627
  • Replacement wheel spacer, ASC #69622
  • For replacement spindle assembly use ASC #78582
  • Replacement PTO, ASC # 89798

Customers Who Viewed This Also Viewed
Agmate Finishing Mower, 4 Ft., Rear Discharge
image Agmate® Finishing Mower, 4' Rear Discharge, 4FMOWR
The average rating for this product is 4.5 out of 5 stars
Fm Point Finishing Mower
image Agmate® Finishing Mower, 6' Rear Discharge, 6FMOWR
The average rating for this product is 5 out of 5 stars
Finishing Mower, 7 Ft, 83.86 In. Cutting Width, Rear Discharge
image Deluxe Finishing Mower, 7 ft., Rear Discharge
The average rating for this product is 4.5 out of 5 stars
Blades To Fit Fm Estate Mower
image Agmate Finishing Mower Blade for FM5F - 5' Estate Mower
Product Review Summary
Based on 8 reviews
The average rating for this product is 5 out of 5 stars
Overall Rating: 5.0/5.0
Customer Reviews
June 06, 2018
Excellent Choice
This shopper rated the product 5 out of 5 stars

I chose the mower for three key reason. 1. Rear Discharge, I can get to items on either side and no stacking of any kind on discharge 2. Solid Tires, no flats. In Texas we have thorns and stickers everywhere. 3. Price, for the money I felt it to be a good value, even though the freight was expensive to get it to Texas. Works wonderful, even better than hoped for. For other's information I have a Ford 8N tractor recently rebuilt. I was considering a 6" but after speaking with my brother which is a farmer and the sales rep. on the phone they suggested the 5' for my tractor. I am glad I did. If what you are mowing is normal height mowing you probably can use a 6' for this tractor. My neighbor had some overgrown areas. I volunteered to mow. My tractor and mower did well but the 6' might have been an issue. I have had my mower a short time but have no dislikes at this time.

Stafford from TX
May 31, 2017
Best of 6 Grooming mowers I have owned.
This shopper rated the product 5 out of 5 stars

I have owned 5 grooming mowers. 2 John Deere rear mount and 1 mid mount. 1 King Cutter rear mount and 1 other rear mount. Purchased all of them new. I was amazed when I engaged the PTO. This is the quietest and smoothest running mower I have ever owned. Quitter than all the others. All the others were side discharge and this one is rear. This may attribute to the low noise for I have never owned a rear discharge mower before. And last, I live in WV and have dealt with this company for years. Their customer service is un-equaled!!! I ordered this mower on Wed., Shipped on Thursday receive it on Friday. WOW--Two days from NC!!

Guy David Sizemore from WV
July 07, 2016
Great for the money
This shopper rated the product 5 out of 5 stars

I bought this to cut the grass at my house so far I love it. I get the same cut every time. It is time to get some new blades but still cuts great my dad has a Coroni and likes mine mower just as much as his. I don't know how long it will last only time will tell. My yard is only 1 ac but my driveway is 1/2 mile long and sandy in places. I hope the deck holds up to the constant sandblasting we will see in due time.

Justin from SC
December 12, 2015
This shopper rated the product 5 out of 5 stars

My first finish mower, works great, I hit foot tall wet grass and it left nice rows I swept up with the ATV pull behind sweeper. Make sure there is oil in the gearcase as it is shipped with none. Great product, I have a Kioti CK2510HST, 19.8 PTO HP and will sell my 5' and buy the 6' next spring.

Mike G. from VA
May 02, 2015
Kick ass mower!
This shopper rated the product 5 out of 5 stars

I bought this off a guy that bought it as damaged stock. I think it got water into the gearbox and was sold still unassembled in the crate. I took a chance and got it home, put it together and never had a problem for 5 years doing 10 acres twice a month. Like others I've had the pins on the wheels come out, chunks of rubber come off the tires and a few welds break. But, and a big but I've really beat this thing. I never got new blades till last year when I hit a bunch of rocks and took chunks out of the old ones. I think I mowed the yard once and then wrecked the new ones by hitting a tree my dog dragged out. So I have new ones again. I've used it as a rough cut mower more times than I know and have had those belts smoking. And until I changed them I didn't even know it had grease nipples on the spindles! So good for the money and good service from agri supply and I'm all the way up in canada so I'm also pleased with how fast they send me parts......

Ben from SA